Skip to content

Chapter test · Physics · Class 11

Properties of Solids and Liquids

This test asks up to 25 questions on the real pattern and marking, and hands you a concept-by-concept report the moment you finish. It covers 7 key concepts: Elasticity, Fluid statics, Fluid dynamics, Viscosity, Surface tension, Thermal properties and calorimetry and Heat transfer.

Start this test free →See a sample questionFree chapter tests included with your account — no card needed.
Questions
Up to 25 — 20 MCQ + 5 numerical
Time
60 minutes, fixed
Marking
JEE Main: +4 / −1 on A, +4 / 0 on B
Class
Class 11 · Physics
Report
Concept breakdown + cognitive demand, instantly

What this test covers

7 key concepts, tested the way the exam tests them.

Mapped from EduPeak’s learning framework for this chapter — the same map your report scores you against.

  1. 1
    Elasticity
    • Applies Hooke’s law and the elastic moduli to deformation problems.Apply & Analyse
  2. 2
    Fluid statics
    • Applies pressure-depth relations, Pascal’s law and Archimedes’ principle.Apply & Analyse
  3. 3
    Fluid dynamics
    • Applies the continuity equation and Bernoulli’s principle to ideal-fluid flow.Apply & Analyse
  4. 4
    Viscosity
    • Applies Newton’s law of viscosity and Stokes’ law including terminal velocity.Apply & Analyse
  5. 5
    Surface tension
    • Applies surface energy and excess-pressure relations, including capillarity.Apply & Analyse
  6. 6
    Thermal properties and calorimetry
    • Solves thermal expansion and heat-exchange (calorimetry) problems including phase change.Apply & Analyse
  7. 7
    Heat transfer
    • Applies conduction, radiation laws and Newton’s law of cooling.Apply & Analyse
Level of thinking demanded7 learning objectives
Recall & understandingApply & AnalyseHigher-order

This chapter is tested mostly at the Apply & Analyse level.

In your board

Where this chapter sits in your syllabus.

The same EduPeak test, found under your own textbook’s chapter name.

  • CBSE
    Mechanical Properties of Solids · Mechanical Properties of Fluids · Thermal Properties of Matter
    ✓ in your syllabus
  • Gujarat (GSEB)
    Mechanical Properties of Solids · Mechanical Properties of Fluids · Thermal Properties of Matter
    ✓ in your syllabus
  • Madhya Pradesh (MPBSE)
    Mechanical Properties of Solids · Mechanical Properties of Fluids · Thermal Properties of Matter
    ✓ in your syllabus
  • Rajasthan (RBSE)
    Mechanical Properties of Solids · Mechanical Properties of Fluids · Thermal Properties of Matter
    ✓ in your syllabus
  • Bihar (BSEB)
    Unit-VII Properties of Bulk Matter
    ✓ in your syllabus
  • Uttar Pradesh (UPMSP)
    स्थूल द्रव्य के गुण / Properties of Bulk Matter
    ✓ in your syllabus
  • ISC (CISCE)
    Properties of Bulk Matter
    ✓ in your syllabus
  • Cambridge International A Level
    Forces, density and pressure (AS) · Deformation of solids (AS) · Temperature (A2)
    ✓ in your syllabus
  • IB Diploma Programme (HL)
    B.1 Thermal Energy Transfers (B. The Particulate Nature of Matter)
    ✓ in your syllabus
See all chapters in your board’s names →

Try one

A sample question from this chapter.

Drawn fresh from the chapter’s bank on every visit. Reveal the worked solution when you are ready — the way your report explains every question.

SamplePhysics· MCQ+4 / -1
Water flows through a horizontal tube as shown in the figure. The difference in height between the water columns in vertical tubes is and the areas of cross-section at and are and respectively. The rate of flow will be ____ . (take )
Horizontal tube with two vertical columns showing a 5 cm height difference; cross-sections A (wider) and B (narrower)
  1. A.
  2. B.
  3. C.
  4. D.
Worked, step by step — the way your report explains every question. Loads on request.
In the real test, every question is fresh from the chapter’s bank — and your report shows the worked solution for each one.

Keep climbing

Related Class 11 Physics chapters

Physics and MeasurementKinematicsLaws of MotionWork, Energy and PowerRotational MotionGravitation

Good to know

About this chapter test

How is the test scored?
Exactly like JEE Main: +4 for a correct answer, −1 for a wrong MCQ, and no negative marking on numericals. Your total, pacing and concept-by-concept accuracy appear in your report the moment you submit.
Which class is Properties of Solids and Liquids in?
Properties of Solids and Liquids sits in Class 11 Physics here. Pick your class when you start — the whole chapter list is organised the same way.
Can I take it more than once?
Yes — each attempt draws from the chapter’s bank, and your report tracks your best and your progress across attempts.
Is it free?
Free chapter tests are included with every account, and each one comes with the complete report. No card needed to start.

25 questions. 60 minutes. One honest answer.

Find out exactly where you stand on this chapter — today.

Start this test free →